HO Railroad Trackside Buildings

HO Railroad Trackside Building Kits

Item #655    MSRP: $39.98

Baggage Building #1 - 2 ½" x 1 ¾" x 2"
Freight House - 2½" x 1¾" x 2"

HO Baggage Building #1/
Small Freight House

The kit consists of laser-cut wood parts. Some of the parts are backed with a peel and stick coating to ease assembly. To apply these parts simply remove the backing sheet from the part and press into place. The peel and stick adhesive allows the part locations to be adjusted slightly when first applied, but will set up to a permanent bond in a few hours.


Item #656    MSRP: $59.98

Toolhouse - 4¼" x 2¼" x 2"
Baggage Building #2 - 2½" x 1¾" x 2"

HO PRR Toolhouse/
Baggage Building #2

The PRR Toolhouses were important during the days when section of the railroad had their own track gang for all railroad operations. Inside these small buildings, various tools were stored as well as extra spikes, bolts and other supplies, along with their hand car or gasoline powered speeder. Usually found near stations, interlocking towers or other company facilities, toolhouses were painted in the same colors as other railroad buildings.


Item #657    MSRP: $127.98

Dimensions - 8¼" x 5" x 4"

HO 2 Bay Engine House

This kit consists of laser-cut wood parts. Some of the parts are backed with a peel and stick coating to ease assembly. To apply these parts imply remove the backing sheet from the part and press into place. The peel and stick adhesive allows the part locations to be adjusted slightly when first applied, but will set up to a permanent bond in a few hours.

 


Item #669    MSRP: $62.98

Dimensions - 4" x 4" x 4"

HO Ellinor Tower

This standard Santa Fe interlocking tower design was used in numerous locations. The kit features laser cut wood components and peel and stick trim. Also includes resin chimney.






Item #671    MSRP: $37.98

Dimensions - 4" x 4" x 4"

HO Trackside Shed Pack

Small sheds like these could be found alongside railroad rights-of-way, either alone or in groups. These kits are based on Nickel Plate Road designs but are typical of designs used throughout the country.

Kit includes parts for four complete buildings:

- Tool/Handcar Shed

- Telegraph Office (also perfect for a Yard Office)

- Crossing Shanty

- Telephone Booth



Item #672    MSRP: $149.98

Dimensions - 12" x 3" x 4"

HO Shoreham Covered Bridge

Located on the Rutland Railroad's Addison branch, this classic Howe truss covered bridge was built in 1897 and served as a railroad bridge until 1951. Today it has been restored and is part of a rails-to-trails footpath.

Kit inlcuded pre-cut wood parts with see-through side panels, tie rods, NBW (nut-bolt-washer) casting and more!

Item #674   MSRP: $67.50

Dimensions - 11¾” X 2¾” X 3½”

HO Stoney Brook Bridge

Bridges are fascinating structures. By using a variety of types and styles the early railroad builders were able to cross countless rivers and streams.


This open-rail bridge is necessary for hobbyists looking for an added dimension to a growing layout.

Item #679    MSRP: $26.98

Dimensions - 5½" x 2" x 2"

HO Yard Office

The ideal office building for a lumber yard or any other trackside setting.

Item #683    MSRP: $98.98

Dimensions - 10½" x 6" x 4"

HO Engine House

This classic single stall engine house will be at home on most layouts, From shortlines and branches to logging and industrial lines. While typical of designs throughout the country, the prototype was built for the Central Vermont. It can provide protection for a variety of locomotives from moderate sized steam locos to almost any diesel. In addition to cover for the locomotive this building also includes a machine shop addition allowing light repairs to be made on the locomotives.

Kit includes positionable doors and interior details.

Item #690    MSRP: $52.98

Dimensions - 5½” x 5” x 3½”

HO PRR Freight House

Based on a standard Pennsylvania RR design, this kit includes laser-cut wood parts, peel-and-stick trim, positionable doors (open or closed) and interior wall bracing detail.

Item #697    MSRP: $66.98

Dimensions - 5" x 7" x 5"

HO Sand House

Based on the Boston & Maine sandhouse still standing (barely) in West Lebanon, New Hampshire.

Kit includes laser-cut wood parts, peel-and-stick trim, Tichy details and NBW castings.

Other Laser-Art Structures Links